SK 300 Automatic Pressure Sandblasting Pot (Portable Sandblasting Pot) is produced by combining the best quality sandblasting equipment and hydrostatic tested. It provides surface sandblasting opportunity up to 30 m2 per hour. The sandblasting process to create the desired effect on the surface with the pressure sandblasting pot, 3-4 cubic meter of abrasive and air mixture per minute at 6-8 bar sprayed with pressure on the surface. The sand put into the sandblasting pot flows to the valve at the bottom. Sandblasting abrasive and compressed air which entered separately to this valve goes to the hose as "mixed". This mixture is advancing rapidly in the blasting hose, come to the nozzle (inner diameter of approximately 6-8 mm), compressed and sprayed out of the nozzle very strongly. The working principle of the portable sandblasting pot can be summarized in its simple form in this way. Our sandblasting pot has the ability to perform wet sandblasting after the necessary arrangement has been made.We recommend that the pressure sandblasting system and our SK 300 Automatic Portable Sandblasting Pot be operated by taking the necessary precautions to protect human and environmental health.