* Üre Plastic Abrasive: Typically the most popular and versatile of the plastic sandblasting medias. Mildly abrasive granular plastic cleaning media suitable for use in both wet and dry blasting systems. The material allows the controlled removal of surface coatings, paint , dirt, flash and burr from a variety of substrates. It is used in applications such as stripping and cleaning vehicle bodies, machine housings, engines, moulds and mould tools, as well as deburring and deflashing metal and electronics components. Hardness Scale 3.5 MOH.

* Melamine Plastic Abrasive: Most aggressive and brittle of the plastic sandblasting medias. Care must be taken when blasting with melamine as prolonged usage can cause damage to soft alloys, plastics, glass etc., but where speed is required melamine is ideal to use on less delicate substrates that require cleaning or stripping without the need to resort to environmentally undesirable solvent/cleaning agents. Hardness Scale 4 MOH.

* Akrilik Plastic Abrasive: Least aggressive and most malleable of the plastic sandblasting medias. 15 times less aggressive than melamine, but consumption is less than Urea for each cycle at the same feed rate. It is used in applications such as stripping and cleaning aerospace applications, such as aircraft bodies, wings and radar cones, as well as deburring and deflashing metal and electronics components. Media is even less abrasive than urea, but has a similar low density which ensures minimal effect on the substrate and allows soft alloys, plastic composites etc., to be cleaned or stripped. Hardness Scale 3.2-3.5 MOH.

* Polyamide Plastic Abrasive:Polyamide / nylon Plastic Sandblasting Media is a specially formulated nylon thermoplastic media, extruded and cut to form either a cylindrical or cuboid shape. Industries using this medium include the electronic and industrial areas, but the main use is in the automotive and thermoset industries. This product is not suitable for Cryogenic Blasting. Suitable for use in all types of blast finishing equipment, to ensure optimum cleaning and recyclability, it is recommended the user employs considerably low pressures.

* Polycarbonate Plastic Abrasive: Plastic Media is an extruded cylindrical high density media. The ambient grade being a general purpose media, whereas the cryogenic grade being a reinforced version for very low temperature work. Industries using this medium include the automotive, electronic and industrial areas, but the main use is in the rubber and thermoset industries. Polycarbonate Plastic Abrasive is specially formulated from PC compound, extruded and cut to form a cylinder. This product produces a resilient non abrasive media which resists splintering and during use gradually rounds off into a sphere. Excellent cutting edge retention and very slow breakdown give the media a long dust free life.